|Fuel Type||Natural Gas / Liquid|
Kawasaki GPS Series
The Kawasaki GPS 4000 gas turbine generator set is a 4,000 kVA prime power source or backup power source. The system can be installed on rooftops or indoors, with notoriously easy system operation and maintenance, having earned high customer acclaim.
***16 units available from original install***
The Kawasaki GPS 4000 gas turbine generator set equipment is comprised of a gas turbine and alternator on a common bed, together with other components including air supply and ventilation equipment, exhaust silencer, gas turbine starter, serviceable fuel tank, and automatic starting panel.
1. Generator Set
This generator set includes a gas turbine, alternator, and related incidental equipment mounted as a set on a common bed, and covered with a soundproof package.
2. Control Panel
Combined gas turbine control panel and starter control panel in a single unit
3. Turbine Starter
Equipped with an electric type starter, comprised of a storage battery and charger.
4. Exhaust Silencer
Equipped with an exhaust silencer to manage exhaust noise.
5. Fuel Tank
Equipped with a daily serviceable fuel tank
6. Air Supply System (for indoor installation)
Equipment to supply the necessary air for operation, comprised of an air supply fan, air supply silencer, and other components.
7. Ventilation System (for indoor installation)
Equipment primarily to discharge heat dissipation air from inside the generator set to the outside, comprised of a ventilation fan, ventilation silencer, and other components.
High performance modern power generation
1. High performance and low cost gas turbine
World class Kawasaki performance is at the heart of these gas turbine generators. Practical for an alternator drive source, this turbine generator is fabricated with a single axis system. These are low cost, high performance, Japanese made turbine generators, backed by a comprehensive parts and supply service system.
2. Single-shaft type for frequency characteristics stability
The M1A-23 turbine employs a single-shaft system, designed for an alternator drive source. There are few speed fluctuations, and it is possible to obtain a good frequency fluctuation rate during steady operation and when connecting or disconnecting the full load. This is impossible with diesel engine or double-shaft gas turbines.
3. Self air cooling
The self cooling nature of the system eliminates the need for water cooling. Consequently, water cooling system maintenance is uneeded, eliminating the possibility for freezing water outages to occur due to maintenance accidents. This reason is another benefit over diesel engines, which require water cooling.
4. Clean and green environment protected exhaust
This natural gas burning Kawasaki M1A-23 turbine results in less emission of most types of air pollutants and carbon dioxide (CO2) than diesel engines, while producing an equal or greater amount of energy.
5. High frequency noise management
The system is designed to limit noise production to the high frequency range, for easy noise management with attached auxilliary equipment. The included silencer equipment further reduces exhaust noise, resulting in non intrusive operating acoustics. In contrast, diesel engines produce low frequency noise, which travels vibrations further and more noticably, while requiring more advanced noise management equipment. Noise management of the Kawasaki M1T-23 turbine is refined and optimized to meet even the most stringent site boundary noise restrictions.
6. Extreme shock & vibration resistance
Due to the high frequency turbine design, no special foundation work or vibration isolation is needed during installation. As a result, there is no requirement for robust spring or rubber shock mounting systems as vibration countermeasures, in contrast with diesel engines, which require major mounting systems. Consequently, outstanding earthquake resistance is attributed to the system. The low resonance frequency design causes little vibration, proving to be highly effective during natural disasters as well. The Kawasaki GPS 4000 has operated without disruption during a major earthquake, supplying infrastructure with stable uninterrupted power during outage.
7. Momentary overload capacity
The main shaft rotation speed can be reduced to momentarily absorb significant inertia when starting an induction motor or similar equipment. When compared with similar class diesel generators, the M1A-23 gas turbine system has a much higher momentary overload capacity, providing an inherent benefit for standby equipment applications.
8. Reliable startup performance
The system starts up quickly without fail, and can be quickly connected to the load without warm-up operation. The startup equipment utilizes a continuous combustion system with a dual injection nozzle equipped with a single-can combustor. In contrast with diesel engines, there are almost no ignition failures during startup with this type of system. Additionally, with no water cooling equipment (as diesel engines require), the self-cooling design of this sytem has a shorter pre-start check. System startup is quick and without fail, initializing load without the need to warm up, as engines have.
9. Compact with easy transport & installation
The M1A-23 gas turbine is unexpectedly small and lightweight, at nearly 1/4 the weight, and roughly 1/7 the volume of similar class diesel engines. This compact turbine generator package can easily be transported and installed at cramped locations including rooftops and basements. Additionally, without the need for water cooling equipment, less installation area is required, allowing for a more effective use of space.
|Output 3,457 kW|
Fuel Type: Gas / Liquid
Gas Consumption: 1,270 NM³/h
(LHV: 40,605 kJ/M³)
Liquid Consumption: 1,465 L/h
(LHV: 43,116 kJ/kg)
Gas Feed Pressure: 1.55-1.75 mPa
Cooling: Self air cooled
|Make: Kawasaki (Japanese)|
Type: Heavy-duty, simple open cycle, industrial single-shaft
Rotor Speed: 22,000 RPM
Output Speed: 1,800 (60 Hz)
Lube Oil Tank Capacity: 240 L
Lube Oil Consumption: .2 L/h
Dry Weight: 6.4 t
|Single can combustor|
|Start Method: Electric motor|
Starting Time: >40 seconds
|Make: Meiden (Japanese)|
Type: 3-phase / 4 pole
Output: 3,200 kW (4,000 kVA)
Voltage Regulation: ±2.5%
Excitation System: Brushless
Voltage: 6.6 kV
Frequency: 60 Hz
Current: 350 A
Power Factor: 80%
Weight: 6,580 kG